Polyisobutylene J3300
BRIEF INTRODUCTION
This product is primarily used for blending Low-molecular-weight no-ash dispersant, two-stroke oil and gear oil. It is widely used in the industries of lubrication, adhesives, rubber and cable insulation etc. It is transparent liquid.
CHARACTERISTICS
Stable chemical properties
Have no residue after high-temperature volatile or thermal decomposition
Excellent lubricating capacity
Oxidation resistance and hydrophobicity
Impermeable to steam and other gases
Be able to increase viscosity
Not volatile
PRODUCT FEATURES AND TEST METHODS
|
ITEM |
INDICE |
TEST METHOD |
|
Density (15°C), kg/m3 |
930 |
GB/T1884 |
|
Kinematic Viscosity (100°C), mm2/s |
5600 |
GB/T265 |
|
Chroma |
40 |
Pt-Co |
|
Molecular Weight (Mn) |
3800 |
Number Average |
|
Molecular Weight Distribution (Mw/Mn) |
---- |
---- |
|
a-Terminal Double Bond Content, % |
---- |
---- |
Packing: The product is packed in 200 liter metal drum (net weight: 165 kg/drum).
Storage: In storage, transportation and oil blending, keep the temperature not higher than 90°C. For long-term storage, the temperature should not exceed 80°C. It would be better to seal with nitrogen. The dry, clean and ventilating warehouse is recommended.
